Megaldon Scrubber Options

Scrubbers

Product:

ISC's Scrubber Lineup

Key Features:

The Megalodon radial has very low work of breathing and uses industry standard Sofnolime 8-12 (797) mesh. The radial also has compression system to prevent channeling. The Axial has very low work of breathing and uses industry standard Sofnolime 8-12 (797) mesh.

Complete Descriptions:

Megalodon 4.1lb / 1.87kg Radial CO2 scrubber canister

Megalodon 4.0lb/kg Radial CO2 scrubber canister | Part #: RS-Radial scrubber 4# ASSY | Price: $925 USD

The Megalodon radial has very low work of breathing and uses industry standard Sofnolime 8-12 (797) mesh. Machined to tight tolerances from Copolymer acetyl and U.S.A made stainless steel. The radial also has compression system to prevent channeling.

4-radial

  • Stainless steel handle for ease of handling
  • Made in the USA

CO2 Duration:

  • Gas mix: Air, Depth: 132fsw/40msw variable depths, Water Temp 55°F/13°C, CO2 production: Variable. Kick and glide recreational level of swimming exertion. Time 130 min.

Special notes:

  • Use Sofnolime 797 only
  • Pack the scrubber as tight as possible
  • When in doubt of scrubber performance, discard and refill with fresh approved absorbent.
  • Label used absorbent with time and date if the intent to use it again. Insure you have enough time on the scrubber that will be appropriate for the next series of dives.
  • Seal used absorbent in a bag or inside Megalodon and seal with head and dust caps.

Megalodon 5.5lb / 2.49kg Radial CO2 scrubber canister

5-5 radialMegalodon 5.5lb/2.32kg Radial CO2 scrubber canister | Part #: RS-Radial scrubber 5#-ASSY | Price: $950.00 USD

The Megalodon radial has very low work of breathing and uses industry standard Sofnolime 8-12 (797) mesh. Machined to tight tolerances from Copolymer acetyl and U.S.A made stainless steel. The radial also has compression system to prevent channeling.

Features:

  • Proven over years of use.
  • CE Approved
  • Used by NOAA and Federal Bureau of Investigation (FBI) and academic institutions
  • Stainless steel handle for ease of handling and lifting
  • Made in the USA

CO2 Duration:

  • Gas Mix: 09/66 TMX (PO2 1.0) (END 80fsw/24msw), Depth: 330fsw/100msw, Water temp: 73°F/23°C, 40 RMV/20bpm/2L TV. CO2 production: 1.35lpm. This is the equivalent to a U.S. Combat Diver swimming above .85 knots. Time-218 minutes. U.S. Navy test methods TM 01-94.
  • Gas mix: 09/66 TMX (PO2 1.0) (END 80fsw/24msw), Depth: 330fsw/100msw, Water Temp 39°F/4°C, 40 RMV/20bpm/2L TV. CO2 production: 1.6lpm. Moderately extreme level of swimming exertion. Time 102 min. CE standard.
  • Gas mix: Air, Depth: 132fsw/40msw, Water Temp 39°F/4°C, 40 RMV/20bpm/2L TV. CO2 production: 1.6lpm. Moderately extreme level of swimming exertion. Time 160 min. CE standard.
  • Gas mix: Air, Depth: 132fsw/40msw variable depths, Water Temp 50°F/10°C, CO2 production: Variable. Kick and glide recreational level of swimming exertion. Time 5 hours. The example of this type of diving would be diving in Scapa Flow Scotland doing two 75 min decompression dives a day for two days and then throw the granular material away.

Work Of Breathing (WOB) CE standard testing.

  • Depth: 330fsw/100msw, Gas mix:(09/66 TMX)-WOB .77 Joule.
  • Depth: 132fsw/40msw, Gas mix: Air-WOB .84 Joule.

Special notes:

  • Use Sofnolime 797 only.
  • Pack the scrubber as tight as possible.
  • When in doubt of scrubber performance, discard and refill with fresh approved absorbent.
  • Label used absorbent with time and date if the intent to use it again. Insure you have enough time on the scrubber that will be appropriate for the next series of dives.
  • Seal used absorbent in a bag or inside Megalodon and seal with head and dust caps.

Megalodon Axial 6.0lb/2.7kg CO2 Scrubber Canister

Megalodon Axial 6.0lb/2.7kg CO2 scrubber canister | Part #: AS-Axial Scrubber-ASSY | Price: $395.00 USD

The Megalodon axial CO2 scrubber canister is the standard issue canister for none CE approved Megs.   The Axial has very low work of breathing and uses industry standard Sofnolime 8-12 (797) mesh. Machined to tight tolerances from see through acrylic plastic and U.S.A made stainless steel. The Axial also has compression system to prevent channeling.

Features:

  • Easy to load with CO2 granular material.
  • See through plastic for easy observation of CO2 color indicator and packing.
  • Industry standard for performance CCR axial.
  • Tested by HSE, and ANSTI in the UK.

CO2 Duration:

  • Gas mix: Air, Depth: 132fsw/40msw, Water Temp: 40.46°F/4.7°C, 40 RMV, 20bpm, 2LTV, Time: 122 min. NOTE: No preheated gas injected as per CE Standard. Scrubber Exothermic reaction was warming the breathing loop. Loop Temp: 50°F/10°C.
  • Gas mix: Air, Depth: 132fsw/40msw variable depths, Water Temp: 55°F/13°C, CO2 production: Variable. Kick and glide recreational level of swimming exertion. Time 5 hours. The example of this type of diving would be diving in Scapa Flow Scotland doing two 75 min decompression dives a day for two days and then throw the granular material away.
  • Mixed gas TMX dives: 180 min variable depths to 330fsw/100msw using the same effort of work as using air at 132fsw/40msw.

Work Of Breathing (WOB) CE standard testing.

Axial ScrubberCE test: 40 RMV, 20bpm, 2L TV, Water temp: 38.12°F/3.4°C

  • Depth: 163fsw/49.8msw, Gas mix Air-WOB-1.26
  • Depth: 308/93.8msw, Gas mix: TMX-WOB-1.01 Joule.

Special notes:

  • Use Sofnolime 797 only.
  • Pack the scrubber as tight as possible.
  • When in doubt of scrubber performance, discard and refill with fresh approved absorbent.
  • Label used absorbent with time and date if the intent to use it again. Insure you have enough time on the scrubber that will be appropriate for the next series of dives.
  • Seal used absorbent in a bag or inside Megalodon and seal with head and dust caps.

Megalodon 8.0lb/3.6 kg Radial CO2 Scrubber Canister

Megalodon 8.0lb/3.63kg Radial CO2 scrubber canister | Part #: RS-Radial scrubber 8# ASSY | Price: $980.00 USD

The Megalodon radial has very low work of breathing and uses industry standard Sofnolime 8-12 (797) mesh. Machined to tight tolerances from Copolymer acetyl and U.S.A made stainless steel. The radial also has compression system to prevent channeling.

8 radialFeatures:

  • U.S. Navy approved.
  • Used by Federal Bureau of Investigation (FBI) and academic institutions.
  • Stainless steel handle for ease of handling.
  • Made in the USA

CO2 Estimated Duration:

  • Gas Mix: 09/66 TMX (PO2 1.0) (END 80fsw/24msw), Depth: 330fsw/100msw, Water temp: 73°F/23°C, 40 RMV/20bpm/2L TV. CO2 production: 1.35lpm. This is the equivalent to a U.S. Combat Diver swimming above .85 knots. Time-317 minutes. U.S. Navy test methods TM 01-94.
  • Gas mix: 09/66 TMX (PO2 1.0) (END 80fsw/24msw), Depth: 330fsw/100msw, Water Temp 39°F/4°C, 40 RMV/20bpm/2L TV. CO2 production: 1.6lpm. Moderately extreme level of swimming exertion. Time 148 min. CE standard.
  • Gas mix: Air, Depth: 132fsw/40msw variable depths, Water Temp 55°F/13°C, CO2 production: Variable. Kick and glide recreational level of swimming exertion. Time 8 hours.

Testing with no pre-heated injected CO2 gas, not as per CE standard required.

  • Gas Mix: Air, Depth 132fsw/40msw, Water Temp: 39°F/4°C, 40RMV/20bpm/2L TV. CO2 production: 1.6lpm. Time 234min.

Work Of Breathing (WOB) CE standard testing.

  • Depth: 312fsw/95.2msw, Gas mix:10/90-WOB .96 Joule.
  • Depth: 163fsw/49.6msw, Gas mix: Air-WOB 1.06 Joule.

Special notes:

  • Use Sofnolime 797 only.
  • Pack the scrubber as tight as possible.
  • When in doubt of scrubber performance, discard and refill with fresh approved absorbent.
  • Label used absorbent with time and date if the intent to use it again. Insure you have enough time on the scrubber that will be appropriate for the next series of dives.
  • Seal used absorbent in a bag or inside Megalodon and seal with head and dust caps.